BMTSQ - COOL-TOOL, 2-050
- MSDS: BMTSQ
- Manufacturer: MONROE FLUID TECHNOLOGY
- Product Name: COOL-TOOL, 2-050
- National Stock Number: 9150-01-327-2949
Product Identification
Product ID:COOL-TOOL, 2-050
MSDS Date:05/29/1991
FSC:9150
NIIN:01-327-2949
MSDS Number: BMTSQ
Responsible Party
HILTON, NY 14468
US
Emergency Phone: 716-392-3434
Info Phone: 716-392-3434
Cage: 60030
Contractor
Telephone: 800-828-8351
Cage: 60030
Ingredients
1,1,1-TRICHLOROETHANE; (METHYL CHLOROFORM) (SARA III)
CAS: 71-55-6
RTECS: KJ2975000
OSHA PEL 350 PPM/450 STEL
ACGIH TLV: 350 PPM/450 STEL
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
MINERAL OIL,PETROLEUM DISTILLATES,SOLVENT-REFINED HEAVY
CAS: 64741-88-4
RTECS: PY8040500
OSHA PEL 5 MG/M3 (OIL MIST)
ACGIH TLV: SEE INGREDIENT NAME
MINERAL OIL,PETROLEUM DISTILLATES,HYDROTREATED (SEVERE)
CAS: 64742-52-5
RTECS: PY8035001
OSHA PEL 5 MG/M3 (OIL MIST)
ACGIH TLV: SEE INGREDIENT NAME
ANIMAL FATTY OIL;(FATTY OIL)
CAS: 8016-28-2
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:CHLOROCARBON/CHOROFLUOROCARBON (CFC)
MATERIALS HAVE PRODUCED SENSITIZATION OF MYOCARDIUM TO EPINEPHRINE
IN LAB ANIMALS & COULD HAVE A SIMILAR EFT IN HUMANS. ADRENOMIMETICS
(E.G., EPINEPHRINE) MAY BE C ONTRAINDICATED EXCEPT FOR
LIFE-SUSTAINING USES IN HUMANS ACUTELY/CHRONICALLY EXPOSED TO
CHLOROCARBONS(EFTS OF OVEREXP)
Explanation of Carcinogenicity:CAS NOS.64742-52-5 AND 64741-88-4 ARE
LISTED BY THE RTECS AS IARC GROUP 1 CARCINOGENS.
Effects of Overexposure:HLTH HAZ: OR CFC'S . ANESTHETIC EFFECT MAY
OCCUR FROM OVEREXPOSURE.
Medical Cond Aggravated by Exposure:INCREASED SENSITIVITY OF HEART TO
ADRENALIN MAY BE CAUSED BY OVEREXPOSURE.
First Aid
First Aid:EYES: FLUSH WITH WATER FOR AT LEAST 15 MINUTES. INGEST: DRINK
LARGE QTYS OF WATER. CALL MD. INHAL: REMOVE TO FRESH AIR. IF NOT
BRTHG, GIVE ARTF RESP PREFERABLY MOUTH-TO-MOUTH. IF BRTHG IS DFCLT,
GIVE O*2. CALL MD. SKIN: FLUSH WITH COPIOUS AMOUNTS OF WATER. CALL
MD .
Fire Fighting
Flash Point Method:COC
Flash Point:350F,177C
Extinguishing Media:WATER, DRY CHEMICALS OR CARBON DIOXIDE.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED PRESSURE DEMAND SCBA
AND FULL PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:VAPORS CAN BE IGNITED BY FLAME OR HIGH
ENERGY SPARK. THERMAL DECOMPOSITION PRODUCTS MAY INCLUDE HCL &
PHOSGENE .
Accidental Release
Spill Release Procedures:AVOID CONTAMINATION OF WATER SUPPLIES. RECOVER
SPILLED MATERIAL ON ABSORBENTS SUCH AS SAWDUST OR VERMICULITE.
PLACE ABSORBED MATERIAL IN CLOSED CONTAINER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:AVOID BREATHING VAPORS IN
CONCENTRATIONS OVER 350 PPM WITH A MAXIMUM PEAK OF 500 PPM.
Other Precautions:KEEP CNTNR CLSD WHEN NOT IN USE. STORE IN DRY PLACE.
CONTROL MISTING TO 5 MG/M3 AIR. NO SMOKING IN AREA OF USE. DO NOT
USE IN GENL VICINITY OF ARC WELDING, OPEN FLAMES/HOT SURFS. HEAT
&/UV RADIATION M AY CAUSE FORMATION OF HCL/PHOSGENE
Exposure Controls
Respiratory Protection:NOT NORMALLY REQUIRED. NIOSH/MSHA APPROVED
RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:LOCAL EXHAUST: ADEQUATE TO PREVENT OVEREXPOSURE.
Protective Gloves:NITRILE, BUTYL/NEOPRENE GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:APRON
Work Hygienic Practices:DO NOT WEAR CONTAMINATED CLOTHING.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
Boiling Pt:B.P. Text:198F,92C
Vapor Pres:92.7
Vapor Density:4.5
Spec Gravity:1.035 (H*2O=1)
Evaporation Rate & Reference:1 (BUAC=1)
Solubility in Water:NIL
Appearance and Odor:GOLDEN OIL WITH CHARACTERISTIC ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
DO NOT MIX WITH CAUSTIC SODA OR OXIDIZING AGENTS.
Stability Condition to Avoid:AVOID OPEN FLAMES AND ELECTRIC ARCS.
Hazardous Decomposition Products:THERMAL DECOMPOSITION CAN PRODUCE
HYDROGEN CHLORIDE. PHOSGENE .
Disposal
Waste Disposal Methods:DISPOSE OF ABSORBED MATERIAL IN MANNER
CONSISTENT WITH FEDERAL, STATE AND LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.